High Pressure Air Pump 30MPA 1.8KW Electric Air Compressor Pneumatic P

High Pressure Air Pump 30MPA 1.8KW Electric Air Compressor Pneumatic PCP Inflator 220v/110v 40L/50L/MIN(Set Pressure Version,110V)

$369.93 $994.65

Feature:
Net Weight: 16KG
Inflating Speed: 2800R/Min
Noise: MAX 78DB
Cooling System: Water
Cooling Compression Stage: Two Stage
Lubrication Mode: Splash Type
Test Inflating Result: It takes 3 mins 50 seconds to fill full 0.45L tank to 30MPA
Test Inflating Result:It takes 8 mins to fill full 1L tank to 300BAR

High-pressure oil-water separator, fiber cotton fine filtration, separation of particles is
more than 0.01 micron suspension,cleanliness up to 99.998%, fiber cotton saturation
can be judged by working time, cumulative work 50 minutes to replace,
please follow the operating instructions.

The cyclone separator is divided into four parts:
1. The cyclone, the compressed air passes through the cyclone and rotates at a high speed.
Under the inertia centrifugal force,the oil particles and the condenser water particles will smash
to the outer wall, and hit the inner wall of the separator casing andthen flow down the wall. discharge
2.Manual drain valve, draining the oil-water mixture after each inflation
3. Brass sintered filter element, which can filter impurities particles directly above 5 microns
4. Safety valve, control the gas pressure in the low pressure part, prevent the high pressure
component of the machine frommalfunctioning, causing the high pressure collective return
and damage the low pressure part